Siemens HiPath 3000 Service Manual page 321

LED statuses and their meanings
H100 LED (see Figure 3-105): signal processor status
●
Table 3-115
LED Status
(on/off)
During Startup and Initialization
Off
Flashing
(250/250 ms)
On
During Operation
Off
Flashing
(250/250 ms)
On
LEDs H0 to H7 (see Figure 3-105): trunk status
●
Table 3-116
LED Status
(on/off)
During Operation
Off
On
Flashing
(500/500 ms)
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
TMAMF - LED Statuses (H100)
Meaning
–
The DSP (digital signal processor)
is waiting for DID digits
The DSP is being reset
The DSP is idle
Error: the DSP has not yet received
the DID digits.
The MFC-R2 filter is on
TMAMF - LED Statuses (H0 to H7)
Meaning
The trunk is idle; no seizure
The trunk was seized
Trunk out of service (e.g. S1/x
"closed")
Boards for HiPath 3000
Peripheral Boards
Action
Replace board.
Action
Check whether the trunk was de-
activated using HiPath 3000
Manager E or the lockout switch.
boards.fm
3-255