Inserting Or Removing Boards; Figure 4-92 Locking And Unlocking Boards - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Installing HiPath 3000

Installing HiPath 3750, HiPath 3700

Inserting or Removing Boards

Introduction

Peripheral boards can be inserted and removed while the power is connected. Two levers are

attached to the front corners of the boards to simplify insertion and removal. When closed,

these levers engage with the board, locking it in place.

See Section 9.2.2 for information on upgrading peripheral boards.

Procedure for inserting and removing the boards (Figure 4-92)

Swing both plastic levers outward simultaneously. You can now pull the board

Unlocking the

out of the system on its guide rails.

Slide the board into the system using its guide rails. Insert the hooks on the

Latching as-

locking levers into the recesses in the shelf. Press down on both levers simul-

taneously in the direction of the shelf until they snap into place.

Locking and Unlocking Boards

Locking and unlocking boards

Special board attachments

The power supply is screwed onto the grill of each cabinet.

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Table of Contents