Installing Boards (Configuration Notes); Board Slots In The Basic And Expansion Cabinet - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Installing Boards (Configuration Notes)

Always wear an antistatic wristband when working on the system (especially when

handling boards).

Introduction

The cabinet(s) are not supplied with pre-installed boards. Install the boards as described in the

following information.

To ensure that the system operates without blocking, you must follow the instruc-

tions in Section 4.2.5.6 concerning PCM highway distribution.

For thermal reasons the IVMNL board may only be installed in the basic cabinet.

There are nine slots available in the basic cabinet BC (slots 1 to 5 and slots 7 to 10) and thirteen

in the expansion cabinet EC (slots 1 to 6 and slots 8 to 14) for peripheral boards.

The central control board CBSAP has a fixed slot (slot 6, only in the basic cabinet BC).

Depending on your requirements, up to three LUNA2 power supply units can be used in the

basic cabinet BC and up to four in the expansion cabinet EC.

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Installing HiPath 3000

Installing HiPath 3800

Table of Contents