Loading The System Software And Installing Subboards On The Cbcpr - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Loading the System Software and Installing Subboards on the

Always wear an antistatic wristband when working on the system (especially when

handling boards). Connect the wristband to the slide-in shelf in the cabinet using the

alligator clip.

The cabinets are already equipped with the boards needed for the customer-specific require-

ments when the system is delivered.

The central control boards are not always fully equipped when delivered. Optional plug-in

boards are packaged individually.

See Chapter 3 for information on slots for subboards on the central control boards.

Place the central control board on a flat surface before installing subboards.

The spacing bolts supplied guarantee the correct insertion of the subboard, so you

should always mount them (see Figure 3-6).

Otherwise you may damage the board.

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Installing HiPath 3000

Installing HiPath 3750, HiPath 3700

Chapters

Table of Contents