Optipoint Phone Adapter - Siemens HiPath 3000 Service Manual

10.2.3.3

optiPoint Phone Adapter

The optiPoint phone adapter is used for connecting a second optiPoint 500 telephone (client
telephone) with its own power supply.
The system treats the client telephone as an independent telephone with a separate phone
number and its own B channel. The client telephone can send and receive calls regardless of
the connection status of the host telephone.
The maximum range between the host and client telephones is approximately 100 m (328 feet)
(for J-Y (ST) 2x2x0.6, ∅ 0.6 mm).
Figure 10-13 optiPoint Phone Adapter
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
MW6 (RJ11) socket assignments:
Pin
1
2 AUX – (a)
3
4
5 AUX + (b)
6
Workpoint Clients
Signal
Free
6
U –
P0/E
U +
P0/E
Free
wclient.fm
optiPoint 500
1
10-23