Siemens HiPath 3000 Service Manual page 757

Hide thumbs Also See for HiPath 3000:

Table of Contents

Transfer the license key from the CLS via the CLM to the CLA either

a) via CLM/CLS communication,

b) manually on the CLM (license key is already available, offline activation).

Once the license data has been transferred to the CLA, the optiClient Attendant can

Licensing is controlled by the CLA. For this reason, communication between the op-

tiClient Attendant and CLA must be ensured during active operation. If the connection

to the CLA is lost or the CLA breaks down, an error message is output at the optiCli-

ent Attendant. At this point, the optiClient Attendant is still operational.

If the optiClient Attendant cannot locate a CLA at startup, the optiClient Attendant will

"Any" number of optiClient Attendants can be installed. However, the CLA monitors

the number of licensed optiClient Attendants as part of the logon procedure and dur-

ing operation.

Depending on the model, up to six optiClient Attendants can be started per system.

When the optiClient Attendant is started for the first time, a 30-day grace period be-

gins. During this time, a optiClient Attendant can be operated without a license. All

optiClient Attendants (including those that have been subsequently installed) must be

licensed before the grace period expires for the first optiClient Attendant installed.

The 30-day limit cannot be extended and a second grace period will not be granted.

In this case, the CLS generates a license key for the CLA PC, and not for HiPath

Note: For CLS, an optiClient Attendant V7.0 is generally specified as a "HiPath 3000/

5000 V5.0 product" and "HiPath 3000 optiClient Attendant V7.0 feature".

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Activity (Remarks)

Licensing optiClient Attendant

licensing.fm

Chapters

Table of Contents