Network Service-[2] Server Feature; Network Service-[2-1] Server Feature-Dhcp - Panasonic KX-NS1000 Pc Programming Manual

28.2 Network Service—[2] Server Feature
28.2.1 Network Service—[2-1] Server Feature—DHCP
Settings for the DHCP Server can be programmed.
Basic Settings
DHCP Server
Specifies if the DHCP server functions of the PBX are enabled or not.
Note
If the PBX is in Backup Master mode of network survivability, it is recommended that an external DHCP
server is used instead of the PBX's DHCP server.
Default
Disable
Value Range
Disable, DHCP Server, DHCP Relay Agent
Maintenance Console Location
28.2.1 Network Service—[2-1] Server Feature—DHCP
Port number
Specifies the port number used for the DHCP server.
Default
67
Value Range
67, 1024–65535
Maintenance Console Location
28.2.1 Network Service—[2-1] Server Feature—DHCP
Server IP address for Relay
Specifies the IP address for the DHCP server for DHCP Relay. This setting is only available when DHCP Relay
Agent is checked.
Default
Not stored
Value Range
1.0.0.1–255.255.255.255
Document Version 2016-03
28.2.1 Network Service—[2-1] Server Feature—DHCP
PC Programming Manual 1199