Pbx Configuration-[4-3] Extension-Dss Console - Panasonic KX-NS1000 Pc Programming Manual

12.3 PBX Configuration—[4-3] Extension—DSS Console
12.3 PBX Configuration—[4-3] Extension—DSS
Console
A DSS Console can be used in conjunction with a PT connected to the same PBX. The DPT Type—Type of
the extension port that DSS Console is connected must be set to DSS in the Port Property screen of the
extension card that the DSS console is connected to. For details, see To access port properties in 9.1 PBX
Configuration—[1-1] Configuration—Slot.
Notice
This screen is for programming legacy gateway PBXs. For information about setting up a legacy gateway
PBX, see 9.29 PBX Configuration—[1-1] Configuration—Slot—Legacy-GW1/Legacy-GW2.
Unless noted otherwise, the programming information is the same as described in the PC Programming
Manual of the legacy gateway PBX. Refer to the corresponding Extension—DSS Console section in the
PC Programming Manual of the legacy gateway PBX for more information.
To copy DSS Console setting values from one location to another, click the Copy to button.
Once DSS console buttons have been programmed, the Terminal Label Print utility can be used to print label
sheets, which can be attached to DSS consoles for quick reference. For details, see 1.2.2.1 Editing and
Printing Terminal Labels in Off-line Mode.
676 PC Programming Manual