LIMITED IP MULTICAST ADDRESS COMMANDS
The 802.1X commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command
create
mcast_filter_profile
config
mcast_filter_profile
profile_id
config
mcast_filter_profile
profile_name
config
mcast_filter_profile
ipv6
delete
mcast_filter_profile
show
mcast_filter_profile
config
limited_multicast_addr
show
limited_multicast_addr
config
max_mcast_group
show
max_mcast_group
Each command is listed in detail, as follows:
create mcast_filter_profile
Purpose
Syntax
Description
Parameters
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Parameter
[ipv4 | ipv6] profile_id <integer 1-24> profile_name <string 20>
<integer 1-24> [[add | delete] <mcast_addr> | profile_name <string 20>]
<string 32> [[add | delete] <mcast_addr> | profile_name <string 20>]
[profile_id <integer 1-24> | profile_name <string 20>] [add | delete]
<mcastv6_addr>
[ipv4 | ipv6] [profile_id [all | <integer 1-24>] | profile_name <string 20>]
{[ipv4 | ipv6]} {profile_id <integer 1-24> | profile_name <string 20>}
ports <portlist> [ipv4 | ipv6] {[add | delete] [profile_id <integer 1-24> |
profile_name <string 20>] | access [permit | deny]}
ports <portlist> {[ipv4 | ipv6]}
ports <portlist> [ipv4 | ipv6] max_group <integer 1-256>
ports <portlist> {[ipv4 | ipv6]}
To create multicast filtering profile on the Switch.
create mcast_filter_profile [ipv4 | ipv6] profile_id <integer 1-24>
profile_name <string 20>
The create mcast_filter_profile command displays the multicast
filtering profiles settings.
[ipv4 | ipv6] – Specify the IPv4 or IPv6 of multicast filter profile to be
created on the Switch.
profile_id <integer 1-24> - Specify the profile id of multicast filter
profile on the Switch.
profile_name <string 20> - Specify the profile name of multicast filter
320
43