Limited Ip Multicast Address - D-Link DAS-3636 Cli Reference Manual

The Limited IP Multicast command allows the administrator to permit or deny access to a port or range of ports by specifying a
range of multicast addresses. The Limited IP Multicast Commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
create mcast_filter_profile
config mcast_filter_profile
config mcast_filter_profile ipv6
delete mcast_filter_profile profile_id
delete mcast_filter_profile profile_name
show mcast_filter_profile
config limited_multicast_addr ports
show limited_multicast_addr ports
config max_mcast_group ports
show max_mcast_group ports
Each command is listed, in detail, in the following sections.
create mcast_filter_profile profile_id
Purpose
Syntax
Description
Parameters
Restrictions
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Parameters
{[ipv4|ipv6]} profile_id <value 1-60> profile_name <name 1-32>
[profile_id < value 1-60>| profile_name <name 1-32> ] { profile_name
<name 1-32> | [add | delete ] <mcast_address_list>}
[profile_id < value 1-60>| profile_name <name 1-32> ] { profile_name
<name 1-32> | [add | delete ] <mcastv6_address_list>}
{[ipv4|ipv6]} [<value 1-60> | all]
{[ipv4|ipv6]} <name 1-32>
{[ipv4|ipv6]} { profile_id <value 1-60> | profile name < name 1-32 >}
[ports <portlist> | vlanid <vlanid_list >] {[ipv4|ipv6]} {[add | delete ]
[profile_id <value 1-60> | profile_name <name 1-32> ] | access [permit
| deny]}
{[ipv4|ipv6]} [ ports {<portlist>} | vlanid <vlanid_list > ]
{[ipv4|ipv6]} [ports <portlist> | vlanid <vlanid_list ] max_group [<value
1-1024> | infinite]
{[ipv4|ipv6]} [ports <portlist>} | vlanid <vlanid_list >]
This command creates a multicast address profile.
create mcast_filter_profile {[ipv4|ipv6]}profile_id <value 1-60> <name 1-32>
This command configures a multicast address profile. Mutliple ranges of multicast addresses
can be defined in the profile.
profile_id − ID of the profile. The range is 1 to 60.
<name 1-32> − Provides a meaningful description for the profile.
Only Administrator and Operator-level users can issue this command.
L IP M
IMITED
54
10
A
ULTICAST DDRESS