Configuring The Aes Schedule Off Time Using Edm - Avaya 4524GT Configuration Manual

4. Click Insert.
5. To choose a day for the AES schedule on time, select a radio button in the
6. To choose an hour of the day for the AES schedule on time, type a value in the
7. To choose a portion of an hour for the AES schedule on time, type a value in the
8. To configure the selected day, hour, and minutes as the AES schedule on time,
9. Click Insert.
Variable definitions
The following table describes the fields of Insert Energy Saver Schedule screen.
Variable
ScheduleDay
ScheduleHour
ScheduleMinute
ScheduleAction

Configuring the AES schedule off time using EDM

Use the following procedure to configure the end of a time interval for the switch to enter lower
power states. The time interval can span a complete week, a complete weekend, multiple days,
or be configured within an individual day.
Prerequisites
Disable AES globally.
Procedure steps
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
Configuration — System
ScheduleDay section.
ScheduleHour section.
ScheduleMinute section.
select the activate radio button in the ScheduleAction section.
Activate is selected by default.
Indicates the day on which this schedule entry takes effect.
Indicates the hour on which this schedule entry takes effect.
Indicates the Minute on which this schedule entry takes effect.
Activates or deactivates the energy savings.
AES schedule configuration using EDM
Value
April 2011 351