Graphing Port Bridge Statistics Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
4. To select specific bridge port status information display criteria, click Filter.
5. Select filtering criteria.
6. Click Filter .
Variable definitions
Use the data in the following table to help you understand the bridge port status display.
Variable
Id
Address
Port
Status

Graphing port bridge statistics using EDM

Use the following procedure to graph port bridge statistical information.
274 Configuration — System
Specifies the VLAN identifier.
Indicates the unicast MAC address for which the bridge has forwarding or
filtering information.
Indicates the port number. The source address must be equal to the value of
the corresponding instance of dot1dTpFdbAddress
A value of 0 indicates that the port number has not been learned, so the bridge
does have the forwarding or filtering information for this address (in the
dot1dStaticTable). You must assign the port value to this object whenever it
is learned even for addresses for which the corresponding value of
dot1dTpFdbStatus is not learned.
Indicates the values for this field include:
• invalid: Entry is no longer valid, but has not been removed from the table.
• learned: Value of the corresponding instance of dot1dTpFdbPort was
learned and is being used.
• self: Value of the corresponding instance of dot1dTpFdbAddress represents
an address of the bridge. The corresponding instance of dot1dTpFdbPort
indicates that a specific port on the bridge has this address.
• mgmt(5): Value of the corresponding instance of dot1dTpFdbAddress is
also the value of an existing instance of dot1dStaticAddress.
• other: None of the preceding. This includes instances where another MIB
object (not the corresponding instance of dot1dTpFdbPort or an entry in the
dot1dStaticTable) is used to determine if frames addressed to the value of
dot1dTpFdbAddress are being forwarded.
Value
April 2011