1. Enter Global Configuration mode.
2. Enter stack auto-unit-replacement config save enable.
3. Press Enter.
stack auto-unit-replacement config save disable
The stack auto-unit-replacement config save disable command disables
automatic configuration saves for non-base units.
No parameters or variables are available for the stack auto-unit-replacement config
save disable command.
1. Enter Global Configuration mode.
2. Enter stack auto-unit-replacement config save disable.
3. Press Enter.
stack auto-unit-replacement config restore unit
The stack auto-unit-replacement config restore unit <1-8> command
restores the saved configuration to a non-base unit. Use the base unit console in Privileged
Mode to enter this command.
1. Enter Privileged Mode.
2. Enter stack auto-unit-replacement config restore unit with the unit
3. Press Enter.
stack auto-unit-replacement config save unit
The stack auto-unit-replacement config save unit <1-8> command saves the
configuration of the selected non-base unit to the base unit, regardless of the state of the AUR
feature. Use the base unit console in Privileged Mode to enter this command.
1. Enter Privileged Mode.
2. Enter stack auto-unit-replacement config save unit with the unit
3. Press Enter.
Configuration — System
number <1-8> to restore.
number <1-8> to save.
Configuring AUR
April 2011
107