Avaya 4524GT Configuration Manual page 268

System configuration using Enterprise Device Manager
TestDone
CableStatus
Pair1Status
Pair1Length
Pair2Status
268 Configuration — System
Variable Value
Indicates whether the TDR test is complete
(true) or not (false).
Indicates the status of the cable as a
summation of the status of the cable
conductor pairs.
• 1—Fail: the cable is experiencing any
combination of open and shorted pairs
• 2—Normal: the cable is operating normally
with no fault found
Indicates the status of the first pair in the
cable. Values include:
• 1—pairFail
• 2—pairNormal
• 3—pairOpen
• 4—pairShorted
• 5—pairNotApplicable
• 6—pairNotTested
• 7—pairForce
• 8—pinShort
Important:
If a 10MB or 100MB link is established
without autonegotiation, Pair 1 returns
Forced mode. The pair length is
meaningless in this case.
Indicates the length of the first pair in the
cable, in meters, measured by the TDR.
Indicates the status of the second pair in the
cable. Values include:
• 1—pairFail
• 2—pairNormal
• 3—pairOpen
• 4—pairShorted
• 5—pairNotApplicable
• 6—pairNotTested
• 7—pairForce
• 8—pinShort
April 2011