Viewing Lldp Neighbor Link Aggregation Information Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
PowerMDISupported
PowerMDIEnabled
PowerPairControlable
PowerPairs
PowerClass

Viewing LLDP neighbor link aggregation information using EDM

Use the following procedure to display LLDP link aggregation properties for the remote
system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot3.
5. On the work area, click the Neighbor Link Aggregate tab.
314 Configuration — System
Variable
Indicates whether MDI power is supported on the
remote port.
Indicates whether MDI power is enabled on the remote
port.
Indicates the value derived from the value of the
pethPsePortPowerPairsControlAbility object (defined
in IETF RFC 3621), this value is used to indicate
whether pair selection can be controlled on the remote
port.
Contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) for the remote
port.
• signal
• spare
Contains the value of the
pethPsePortPowerClassifications object (defined in
IETF RFC 3621) for the remote port.
• class0
• class1
• class2
• class3
• class4
Value
April 2011