Enabling Aes Efficiency Mode Using Edm; Disabling Aes Efficiency Mode Using Edm - Avaya 4524GT Configuration Manual

Enabling AES efficiency mode using EDM

Use the following procedure to enable AES efficiency mode for the switch.
When enabled, AES efficiency mode enables AES globally and for each port, enables AES
PoE power save mode, and configures AES scheduling to predetermined values (on time 18:00
and off time 07:30 daily).
Important:
AES efficiency mode overrides custom AES scheduling and PoE power saving mode. You
will be prompted to confirm that you want to enable AES efficiency mode before
proceeding.
Prerequisites
Disable AES globally.
Procedure steps
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Globals tab.
4. Select the EfficiencyModeEnabled check box.
5. Click Apply.
6. On the toolbar, you can click Refresh to update the work area data display.

Disabling AES efficiency mode using EDM

Use the following procedure to disable AES efficiency mode for the switch.
When enabled, AES efficiency mode enables AES globally and for each port, enables AES
PoE power save mode, and configures AES scheduling to predetermined values (on time 18:00
and off time 07:30 daily).
Configuration — System
Global AES configuration using EDM
April 2011 349