Restoring Configuration From An Ascii File - Avaya 4524GT Configuration Manual

System configuration using ACLI
Table 21: copy config tftp command parameters
Address
<filename>
copy config usb command
Use the copy config usb command to store a configuration file to a USB Mass Storage
Device. The syntax for the copy config usb command is:
copy config usb {filename <filename> | unit <1-8>
The copy config usb command is executed in the Privileged EXEC command mode.
Table 22: copy config usb command parameters
copy config usb command.
Table 22: copy config usb command parameters
<filename>
<1-8>

Restoring configuration from an ASCII file

You can restore the configuration from an ASCII file using the following commands:
• configure { network | usb } command
• script command
configure { network | usb } command
Use the configure {network | usb} command to restore contents of the current
configuration from an ASCII file. The syntax for the configure {network | usb} is:
configure {network [address <A.B.C.D>] filename <filename>| usb
filename <filename> [unit <1-8>]}
The configure {network | usb} command is executed in the Privileged EXEC command
mode.
88 Configuration — System
Parameters
Parameters
on page 89
Description
The IP address of the TFTP server.
The name of the file to be retrieved.
on page 88 outlines the parameters for the
Description
The name of the file to be retrieved.
The unit number in which the USB device is
inserted in, if the unit is a part of the stack .
on page 88
April 2011