Customizing Acli Banner Using Edm - Avaya 4524GT Configuration Manual

Variable
BannerControl

Customizing ACLI banner using EDM

Use this procedure to customize banner that is displayed on the Avaya Command Line (ACLI)
Telnet screen.
Prerequisites
Select custom for the ACLI banner type.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Chassis.
3. In the Chassis tree, double-click Chassis.
4. In the work area, click the Custom Banner tab.
5. To select a switch for which to customize the banner, click a row.
6. In the row, double-click the cell in the Line column.
7. Type a character string for the banner.
8. Click Apply.
Variable definitions
Use the data in this table to customize the ACLI banner.
Configuration — System
Specifies the banner to be displayed as soon as you connect to
an Avaya Ethernet Routing Switch 4500 Series device using
Telnet. Values include:
• static—uses the predefined static banner.
• custom—uses the previously set custom banner.
• disabled—prevents the display of any banner.
Customizing ACLI banner using EDM
Value
April 2011 225