Viewing The Switch Poe Conservation Level Request Tlv Configuration Using Acli - Avaya 4524GT Configuration Manual

Important:
Only Ethernet ports on switches that support PoE can request a specific power conservation
level for an Avaya IP phone.
Variable definitions
<0-255>
<portList>
Viewing the switch PoE conservation level request TLV
configuration using ACLI
Use this procedure to display Poe conservation level request configuration for local switch
ports.
Prerequisites
Log on to the Privileged EXEC mode in ACLI.
Procedure steps
Display the PoE conservation level request configuration for one or more switch ports
by using the following command:
show lldp [port <portlist>] vendor-specific avaya poe-
conservation-request-level
Variable definitions
<portlist>
Job aid: show lldp vendor-specific avaya poe-conservation-request-level
command output
The following figure displays sample output for the show lldp vendor-specific avaya
poe-conservation-request-level command.
Configuration — System
Variable
Variable
Value
Specifies the power conservation level to
request for a vendor specific PD. Values
range from 0 to 255. With the default value
of 0, the switch does not request a power
conservation level for an Avaya IP phone
connected to the port.
Specifies a port or list of ports.
Value
Specifies a port or list of ports.
Configuring LLDP using ACLI
April 2011 181