System configuration using ACLI
Enabling all LLDP DOT1 TLVs for transmission on the router and IP Phone
ports
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot1 port-vlan-id
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot1 port-protocol-vlan-
id
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot1 vlan-name
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot1 protocol-identity
EAP LLDP STP
Checking the LLDP settings of the router and IP Phone ports
The following represents screen output for the show lldp port 1/13 tx-tlv dot1
command:
4548GT-PWR(config-if)#show lldp port 1/13 tx-tlv dot1
Dot1 protocols: STP,EAP,LLDP
Port PortVlanId VlanNameList PortProtocol
13
true
Enabling all LLDP DOT3 TLVs for transmission on the router and IP Phone
ports
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot3 mac-phy-config-
status
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot3 mdi-power-support
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot3 link-aggregation
4548GT-PWR(config-if)#lldp tx-tlv port 1/13 dot3 maximum-frame-size
Checking the LLDP settings of the router and IP Phone ports
The following represents screen output for the show lldp port 1/13 tx-tlv dot3
command:
4548GT-PWR(config-if)#show lldp port 1/13 tx-tlv dot3
196
Configuration — System
LLDP dot1 port tlvs
VlanId
1,3,5,7,9,11
1,3,5,7,9,117
7-118
-118
Protocol
Identity
EAP,LLDP
April 2011