Aur Function - Avaya 4524GT Configuration Manual

Table 3: show stack auto-unit-replacement fields
Auto Unit Replacement Auto-Restore
Auto Unit Replacement Auto-Save
Last Configuration-Save Time-Stamp
Ready for Replacement
For information about configuring AUR with ACLI, see
information about configuring AUR with Enterprise Device Manager (EDM), see
AUR using EDM

AUR function

The CFG mirror image is a duplicate CFG image (stored in the flash drive) of a unit in a stack.
The mirror image does not reside in the same unit with the CFG image. The unit that contains
Configuration — System
Field
on page 226.
Definition
Enable: During a unit replacement, the
configuration will be automatically restored to
the new unit.
Disable: During a unit replacement, the
configuration will not be restored
automatically.
Enable: The current configuration of a unit in
stack including base unit (if the stack is of 3 units
or bigger) will be automatically saved to the
base unit.
Disable: The current configuration of a unit in
stack including base unit (if the stack is of 3 units
or bigger) will not be automatically saved to the
base unit.
The system-up time of the non base unit
recorded when the non base unit sends
configuration to the base unit.
Yes: The current configuration of the non base
unit is saved to the base unit. This unit is
currently ready for replacement.
No: The current configuration of the non base
unit is not saved to the base unit. The latest
changes of the configuration of the non base
unit will be lost if the unit is replaced with a new
unit.
Configuring AUR
Auto Unit Replacement
on page 105. For
Configuring
April 2011 19