Enabling Or Disabling Avaya Tlv Transmit Flags Using Edm - Avaya 4524GT Configuration Manual

MfgName
ModelName
AssetID

Enabling or disabling Avaya TLV transmit flags using EDM

Use this procedure to enable or disable the transmission of optional proprietary Avaya TLVs
from switch ports to Avaya IP phones.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Port Config tab.
6. To select a port, click the PortNum.
7. In the port row, double-click the cell in the TLVsTxEnable column.
8. Select a checkbox to enable a TLV.
9. Click Ok.
10. On the toolbar, click Apply.
Variable definition
poeConservationLevel
Configuration — System
Variable
OR
Clear a checkbox to disable a TLV.
Variable
Enabling or disabling Avaya TLV transmit flags using EDM
Indicates the vendor-specific manufacturer
name as advertised by the remote device.
Indicates the vendor-specific model name as
advertised by the remote device.
Indicates the vendor-specific asset tracking
identifier as advertised by the remote
device.
Value
Enables or disables the TLV for requesting a
specific power conservation level for an Avaya IP
phone connected to the switch port.
Value
April 2011 333