Avaya 4524GT Configuration Manual page 89

Table 23: Config {network | usb} command parameters
for this command.
Table 23: Config {network | usb} command parameters
network
<A.B.C.D>
usb
<1-8>
<filename>
script command
Use the script command to restore an entry (either a TFTP or an USB entry) in the ASCII
configuration script table.
Important:
When you use the TFTP address parameter to perform copy or download commands, the
system overwrites the TFTP server address
The syntax for the script command is:
script <1-127> {usb [unit<1-8>] <filename> | tftp <hostname | IP>
<filename>}
The script command is executed in the Privileged EXEC command mode.
Table 24: script parameters
<1-127>
usb
<1-8>
tftp
<hostname | ip>
filename
Configuration — System
Parameter
Parameters
on page 89 outlines the parameters
Description
Retrieve the configuration from a TFTP
server.
The IP address of the TFTP server.
Retrieve the configuration from an USB
mass storage device.
The unit number in which the USB device is
inserted in, if the unit is a part of the stack.
The name of the file to be retrieved.
Description
The index of the entry to be restored.
Restores an USB entry.
The unit number in which the USB device is
inserted in, if the unit is a part of the stack.
Restores a TFTP entry.
The hostname or IP address of the TFTP
server.
The name of the file to be restored.
Configuration files in ACLI
April 2011 89