System configuration using ACLI
show ipv6 interface
Enter show ipv6 interface.
Job aid
The following graphic shows the results of the show ipv6 interface command.
Displaying IPv6 interface addresses
View IPv6 interface addresses to learn the addresses.
Prerequisites
Log on to the User EXEC mode in ACLI.
Display IPv6 interface addresses
Use the following command to display IPv6 interface addresses:
show ipv6 address interface [vlan <1-4094> | <WORD 0–45>]
Variable definitions
The following table list the variables and definitions.
116
Configuration — System
April 2011