Viewing Lldp Local Vlan Name Information Using Edm - Avaya 4524GT Configuration Manual

PortNum
ProtoVlanId
ProtoVlanSuported
ProtoVlanEnabled
ProtoVlanTxEnable

Viewing LLDP local VLAN name information using EDM

Use the following procedure to display LLDP VLAN Name properties for the local system and
to enable or disable the transmission of this information from a specified port.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot1.
5. On the work area, click the Local VLAN Name tab.
6. To select a port to edit, click the port row.
7. In the port row, double-click the cell in the VlanNameTxEnable column.
8. Select a value from the list—true to enable transmitting local VLAN name
9. Click Apply .
Variable definitions
The following table describes the Local VLAN Name tab fields.
Configuration — System
Variable
information from the port, or false to disable transmitting local VLAN name
information from the port.
LLDP Port dot1 configuration using EDM
Indicates the port number.
Indicates the ID of the port and protocol VLANs
associated with the local port. A value of zero is used
if the system does not know the protocol VLAN ID
(PPVID).
Indicates whether the local port supports port and
protocol VLANs.
Indicates whether the port and protocol VLANs are
enabled on the local port.
Specifies whether the corresponding local port and
protocol VLAN information are transmitted from the
port.
Value
April 2011 303