Viewing LLDP neighbor VLAN name information using EDM
Using the following procedure to display LLDP VLAN name properties for the remote
system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot1.
5. On the work area, click the Neighbor VLAN Name tab.
Variable definitions
The following table describes the Neighbor VLAN Name tab fields.
TimeMark
LocalPortNum
Index
VlanId
VlanName
Viewing LLDP neighbor protocol information using EDM
Use the following procedure to display LLDP protocol properties for the remote system.
Configuration — System
Variable
LLDP Port dot1 configuration using EDM
Indicates the TimeFilter for this entry.
Identifies the local port on which the remote system
information is received.
Indicates the arbitrary local integer value used by this
agent to identify a particular MSAP. An agent is
encouraged to assign monotonically increasing index
values to new entries, starting with one, after each
reboot.
Indicates the integer value used to identify the IEEE
802.1Q VLAN IDs with which the remote port is
compatible.
Indicates the VLAN name identified by the VLAN ID
associated with the remote system.
Value
April 2011
307