Ipv6 Interface Management Using Edm; Viewing Ipv6 Interfaces Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
Variable definitions
Use the data in this table to help you configure IPv6 globally.
Variable
AdminEnabled
OperEnabled
Forwarding
DefaultHopLimit
IcmpNetUnreach
IcmpRedirectMsg
IcmpErrorInterval
IcmpErrorQuota
MulticastAdminStatus

IPv6 interface management using EDM

Use the information in this section to view, create, or delete IPv6 interfaces.

Viewing IPv6 interfaces using EDM

Use the following procedure to view an IPv6 interface ID to a VLAN to learn the ID.
Procedure steps
1. From the navigation tree, double-click IPv6.
2. In the IPv6 tree, double-click IPv6.
3. On the work area, click the Interfaces tab.
250 Configuration — System
Enables or disables administration function.
Enables or disables the operation.
Indicates whether this acts as a router or not.
Indicates the Hop Limit. Default number of hops— 30
Enables or disables the ICMP net unreach feature.
Enables or disables ICMP redirect message feature.
Indicates the time to wait before sending an ICMP error
message. A value of 0 means the system does not send an
ICMP error message. Range is 0–2147483647 ms.
Indicates the number of ICMP error messages that can be sent
out during ICMP error interval. Default value: 1
Indicates the admin status for multicast for this interface.
Value
April 2011