ipv6 interface enable
1. At the config prompt, enter interface vlan 1.
2. Enter ipv6 interface enable.
3. Enter exit to return to the main menu.
Use the following procedure to enable ipv6 admin status:
ipv6 enable
Enter ipv6 enable.
Job aid
The following table lists the variables and definitions for ipv6 enable:
Table 42: IPv6 variables and definitions
enable
Configuring IPv6 interface on the management VLAN
Use the following procedures to assign an IPv6 address to a VLAN:
config vlan
1. Go to the config prompt in ACLI.
2. Enter interface vlan 1.
3. Enter ipv6 interface enable.
4. Enter exit to return to the main menu.
Displaying the IPv6 interface information
Use the following procedure to display the IPv6 interface information:
Configuration — System
Variable
Definition
Default admin status: disable
Configuring IPv6
April 2011
115