Viewing Neighbor Inventory Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager

Viewing neighbor inventory using EDM

Use this procedure to display LLDP inventory information for the remote system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port MED.
5. On the work area, click the Neighbor Inventory tab.
Variable definitions
The following table describes the Neighbor Inventory tab fields.
TimeMark
LocalPortNum
Index
HardwareRev
FirmwareRev
SoftwareRev
SerialNum
332 Configuration — System
Variable Value
Indicates the TimeFilter for this entry.
Identifies the local port on which the remote
system information is received.
Indicates the arbitrary local integer value
used by this agent to identify a particular
MSAP. An agent is encouraged to assign
monotonically increasing index values to
new entries, starting with one, after each
reboot.
Indicates the vendor-specific hardware
revision string as advertised by the remote
device.
Indicates the vendor-specific firmware
revision string as advertised by the remote
device.
Indicates the vendor-specific software
revision string as advertised by the remote
device.
Indicates the vendor-specific serial number
as advertised by the remote device.
April 2011