Disabling Ipv6 Interface; Displaying The Global Ipv6 Configuration - Avaya 4524GT Configuration Manual

System configuration using ACLI

Disabling IPv6 interface

Use the following procedure to disable the IPv6 interface:
Enter the following command to disable IPv6.
no ipv6 interface [address <ipv6_address>] [all] [enable]

Displaying the global IPv6 configuration

Use the following procedure to display the IPv6 global configuration:
Enter the following command to display the global IPv6 configuration.
show ipv6 global
Job aid
The following graphic shows a possible result of the show ipv6 global command.
4526(config)#show ipv6 global
forwarding
default-hop-cnt
number-of-interfaces
admin-status
icmp-error-interal
icmp-error quota
icmp-redirect-msg
icmp-unreach-msg
multicast-admin-status
The following table describes the default settings for the fields in the graphic.
forwarding
default-hop-cnt
number-of-interfaces
admin-status
120 Configuration — System
Field
: disabled
: 30
: 1
: enabled
: 1000
: 50
: disabled
: disabled
: disabled
Default setting
disabled
30
1
enabled
April 2011