Displaying Complete Gbic Information; Displaying Hardware Information - Avaya 4524GT Configuration Manual

System configuration using ACLI
no
default
show

Displaying complete GBIC information

You can obtain complete information for a GBIC port using the following command:
show interfaces gbic-info <port-list>
Substitute <port-list> with the GBIC ports for which to display information. If no GBIC is
detected, this command shows no information.
This command is available in all command modes.

Displaying hardware information

To display a complete listing of information about the status of switch hardware in ACLI, use
the following command:
show system [verbose]
The [verbose] option displays additional information about fan status, power status, and
switch serial number.
Switch hardware information is displayed in a variety of locations in EDM. You need no special
options in these interfaces to display the additional information.
110 Configuration — System
Disable Stack Forced Mode.
Return to the default setting for Stack Forced Mode.
Show Stack Forced Mode status for the switch. The following
list shows the possible responses:
• Forced-Stack Mode: Enabled Device is not
currently running in forced Stack Mode.
Forced-Stack Mode: Enabled Device is
•
currently running in forced Stack Mode.
• Forced-Stack Mode: Disabled Device is
not currently running in forced Stack
Mode.
April 2011