Avaya 4524GT Configuration Manual page 151

Run the show SNTP command in Privileged EXEC command mode.
show sys-info command
The show sys-info command displays the current system characteristics.
The syntax for the show sys-info command is
show sys-info
Run the show sys-info command in Privileged EXEC command mode.
Important:
You must have SNTP enabled and configured to display GMT time.
SNTP enable command
The SNTP enable command enables SNTP.
The syntax for the SNTP enable command is
sntp enable
Run the SNTP enable command in Global Configuration command mode.
Important:
The default setting for SNTP is Disabled.
No SNTP enable command
The no SNTP enable command disables SNTP.
The syntax for the no SNTP enable command is
no sntp enable
Run the no SNTP enable command in Global Configuration command mode.
SNTP server primary address command
The SNTP server primary address command specifies the IP addresses of the primary
NTP server.
The syntax for the SNTP server primary address command is
Configuration — System
General switch administration using ACLI
April 2011 151