Configuring Aur Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
Variable
Type
Id
Line

Configuring AUR using EDM

Use this procedure to configure automatic unit replacement (AUR).
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Chassis.
3. In the Chassis tree, double-click Chassis.
4. In the work area, select the AUR tab.
5. To enable automatic unit replacement, select the AutoUnitReplacementEnabled
6. To enable automatic unit replacement save, select the
7. In the AutoUnitReplacementForceSave dialog box, type a value.
8. In the AutoUnitReplacementRestore dialog box, type a value.
9. Click Apply .
226 Configuration — System
Indicates whether the banner type is for a standalone (switch)
or a stack (stack).
Indicates the line of text within a custom banner.
Specifies the banner character string. The custom banner is 19
lines high and can be up to 80 characters long.
check box.
OR
To disable automatic unit replacement, clear the AutoUnitReplacementEnabled
check box.
AutoUnitReplacementSaveEnabled check box.
OR
To disable automatic unit replacement save, clear the
AutoUnitReplacementSaveEnabled check box.
Value
April 2011