Viewing Local Link Aggregate Tab Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
4. In the 802.1AB tree, double-click Port dot3.
5. On the work area, click the Local PoE tab.
Variable definitions
The following table describes the Local PoE tab fields.
PortNum
PowerPortClass
PowerMDISupported
PowerMDIEnabled
PowerPairControlable
PowerPairs
PowerClass

Viewing Local Link Aggregate tab using EDM

Use the following procedure to display LLDP link aggregation properties for the local
system.
310 Configuration — System
Variable
Indicates the port number.
Indicates the port Class of the local port.
Indicates whether MDI power is supported on the local
port.
Indicates whether MDI power is enabled on the local
port.
Indicates the value derived from the value of the
pethPsePortPowerPairsControlAbility object (defined
in IETF RFC 3621), this value is used to indicate
whether pair selection can be controlled on the local
port.
Contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) for the local port:
• signal
• spare
Contains the value of the
pethPsePortPowerClassifications object (defined in
IETF RFC 3621) for the local port:
• class0
• class1
• class2
• class3
• class4
Value
April 2011