Graphing Lldp Rx Statistics Using Edm - Avaya 4524GT Configuration Manual

AgeoutsTotal

Graphing LLDP RX statistics using EDM

Use the following procedure to graph LLDP receive statistics.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click LLDP.
5. On the work area, click the RX Stats tab.
6. In the table, select the port for which you want to display statistics.
7. On the toolbar, click Graph.
8. Highlight a data column to graph.
9. On the toolbar, click a graph button.
Configuration — System
Variable
of IEEE 802.1ab-2004. An unrecognized TLV can be
a basic management TLV from a later LLDP version.
Represents the number of age-outs that occurred on
a given port. An age-out is "the number of times the
complete set of information advertised by a particular
MSAP is deleted from tables in
lldpRemoteSystemsData and lldpExtensions objects
because the information timeliness interval has
expired." This counter is similar to
lldpStatsRemTablesAgeouts, except that it is on a per-
port basis. This enables NMS to poll tables associated
with the lldpRemoteSystemsData objects and all
LLDP extension objects associated with remote
systems on the indicated port only. This counter is set
to zero during agent initialization. When the admin
status for a port changes from disabled to rxOnly,
txOnly or txAndRx, the counter associated with the
same port is reset to 0. The agent also flushes all
remote system information associated with the same
port. This counter is incremented only once when the
complete set of information is invalidated (aged out)
from all related tables on a particular port. Partial aging
is not allowed, and thus, does not change the value of
this counter.
LLDP configuration using EDM
Value
April 2011 291