Viewing Lldp Neighbor Protocol Vlan Information Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager

Viewing LLDP neighbor protocol VLAN information using EDM

Use the following procedure to display LLDP protocol VLAN properties for the remote
system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port dot1.
5. On the work area, click the Neighbor Protocol VLAN tab.
Variable definitions
The following table describes the Neighbor Protocol VLAN tab fields.
TimeMark
LocalPortNum
Index
ProtoVlanId
ProtoVlanSuported
ProtoVlanEnabled
306 Configuration — System
Variable
Variable
the PVID or does not support port-based VLAN
operation, the value is zero.
Indicates the TimeFilter for this entry.
Identifies the local port on which the remote system
information is received.
Indicates the arbitrary local integer value used by this
agent to identify a particular MSAP. An agent is
encouraged to assign monotonically increasing index
values to new entries, starting with one, after each
reboot.
Indicates the ID of the port and protocol VLANs
associated with the remote port. A value of zero is
used if the system does not know the protocol VLAN
ID (PPVID).
Indicates whether the remote port supports port and
protocol VLANs.
Indicates whether the port and protocol VLANs are
enabled on the remote port.
Value
Value
April 2011