Automatically Downloading A Configuration File Using Edm - Avaya 4524GT Configuration Manual

Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click File System.
3. On the work area, click the ASCII Config Script Files tab.
4. In the table, double-click the cell under the ScriptSource heading for the parameter
5. Type the IP address of the desired TFTP server and the name under which to store
6. Double-click the cell under the ScriptManual header, and select Download option
7. On the toolbar, click Apply.
8. Check the ScriptLastStatusChange field for the file transfer status.

Automatically downloading a configuration file using EDM

Use the following procedure to download a configuration file automatically.
Important:
When you use the TFTP address parameter to perform copy or download commands, the
system overwrites the TFTP server address
Configuration — System
you want to change.
the configuration file in the format— tftp://<ip address>/<filename>.
If you retrieve the configuration file from a USB storage device, and the USB is
inserted in a stand-alone unit, type the name under which to store the configuration
file in the following format—usb://<filename>.
If the USB device is inserted in a unit of a stack, type usb://<unit number>/
<filename>.
to transfer the file from a TFTP server or from a USB mass storage device.
If the status of the file download is manualDownloadInProgress, wait for up to 2
minutes, and then click Refresh to see any new status applied to the upload.
The file downlaod is complete when the status displays either
manualDownloadPassed or manualDownloadFailed.
ASCII configuration file management using EDM
April 2011 245