Viewing Neighbor Capabilities Using Edm - Avaya 4524GT Configuration Manual

Ethernet routing switch 4500 series
Table of Contents

Advertisement

System configuration using Enterprise Device Manager
PortNum
PSEPortPowerAvailable
PSEPortPDPriority

Viewing neighbor capabilities using EDM

Use this procedure to display LLDP capabilities for the remote system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port MED.
5. On the work area, click the Neighbor Capabilities tab.
Variable definitions
The following table describes the Neighbor Capabilities tab fields.
TimeMark
LocalPortNum
324
Configuration — System
Field
Field
Description
Indicates the port number.
Contains the value of the power available (in
units of 0.1 watts) from the PSE through this
port.
Indicates the PD power priority that is
advertised on this PSE port:
• unknown: priority is not configured or
known by the PD
• critical: the device advertises its power
priority as critical, see RFC 3621
• high: the device advertises its power
priority as high, see RFC 3621
• low: the device advertises its power priority
as low, see RFC 3621
Description
Indicates the TimeFilter for this entry.
Identifies the local port on which the remote
system information is received.
April 2011

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents