Viewing Lldp Neighbor Information Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
Enabling or disabling LLDP Management Address TLV transmission using
EDM
Use the following procedure to enable or disable the transmission of Management Address
TLVs on the local system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click LLDP.
5. In the work area, click the Local Management tab.
6. Double-lick the cell in the AddPortsTxEnable column for an IPv4 or IPv6 row.
7. To enable the transmission of Management Address TLVs, select one or more port
8. Click Ok.
9. On the toolbar, click Apply.

Viewing LLDP neighbor information using EDM

Use the following procedure to display LLDP properties for the remote system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click LLDP.
5. On the work area, click the Neighbor tab.
296 Configuration — System
numbers.
OR
To disable the transmission of Management Address TLVs, deselect one or more
port numbers.
April 2011