System configuration using Enterprise Device Manager
TimeMark
LocalPortNum
Index
MaxFrameSize
LLDP Port MED configuration using EDM
Use the information in this section to configure and view LLDP Media Endpoint Devices (MED)
information.
LLDP MED policy management using EDM
Use the information in this section to view, create, and edit LLDP MED policies for the
switch.
Viewing LLDP MED policies using EDM
Use this procedure to view LLDP MED policy properties for the local system.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, double-click Diagnostics.
3. In the Diagnostic tree, double-click 802.1AB.
4. In the 802.1AB tree, double-click Port MED.
5. In the work area, click the Local Policy tab.
Variable definitions
Use the data in the following table to help you understand the LLDP MED local policy
display.
316
Configuration — System
Variable
Indicates the TimeFilter for this entry.
Indicates the local port on which the remote system
information is received.
Indicates the arbitrary local integer value used by this
agent to identify a particular MSAP. An agent is
encouraged to assign monotonically increasing index
values to new entries, starting with one, after each
reboot.
Indicates the maximum frame size for the remote
port.
Value
April 2011