Table of Contents
Advertisement
7.2.5
Configuring AES
Use the following commands to enable AES and configure the following schedule:
Activate AES during the week from Monday to Friday nighttime from 6:00 pm to 8:30 am
Deactivate AES on Saturday from 8:00 am to 5:00 pm
Deactivate AES on Sunday from 9:00 am to 5:00 pm
1
Add an SNTP server and enable it:
IPO4526GTX#configure terminal
IPO4526GTX(config)#sntp server primary address <ip_address>
IPO4526GTX(config)#sntp enable
2
In Interface Configuration mode, enable AES:
IPO4526GTX(config)#interface fastEthernet all
IPO4526GTX(config-if)#energy-saver enable
IPO4526GTX(config-if)#exit
3
Configure the AES schedule and enable it:
IPO4526GTX(config)#energy-saver schedule weekday 08:30 deactivate
IPO4526GTX(config)#energy-saver schedule weekday 18:00 activate
IPO4526GTX(config)#energy-saver schedule saturday 08:00 deactivate
IPO4526GTX(config)#energy-saver schedule saturday 17:00 activate
IPO4526GTX(config)#energy-saver schedule sunday 09:00 deactivate
IPO4526GTX(config)#energy-saver schedule sunday 17:00 activate
IPO4526GTX(config)#energy-saver enable
4
Activate or deactivate AES with the following commands:
IPO4526GTX#energy-saver activate
IPO4526GTX#energy-saver deactivate
October 2012
Avaya Inc. – External Distribution
IP Office & Ethernet Switching Technical Configuration Guide
avaya.com
34
Advertisement
Table of Contents
