Avaya 4524GT Configuration Manual page 331

4. In the 802.1AB tree, double-click Port MED.
5. On the work area, click the Neighbor PoE PD tab.
Variable definitions
The following table describes the Neighbor PoE PD tab fields.
TimeMark
LocalPortNum
Index
PDPowerReq
PDPowerSource
PDPowerPriority
Configuration — System
Variable
LLDP Port MED configuration using EDM
Value
Indicates the TimeFilter for this entry.
Identifies the local port on which the remote
system information is received.
Indicates the arbitrary local integer value
used by this agent to identify a particular
MSAP. An agent is encouraged to assign
monotonically increasing index values to
new entries, starting with one, after each
reboot.
Specifies the value of the power required (in
units of 0.1 watts) by a Powered Device (PD)
connected remotely to the port.
Defines the type of Power Source advertised
as being used by the remote device:
• fromPSE: indicates that the device
advertises its power source as received
from a PSE.
• local: indicates that the device advertises
its power source as local.
• localAndPSE: indicates that the device
advertises its power source as using both
local and PSE power.
Defines the priority advertised as being
required by the PD connected remotely to the
port:
• critical: indicates that the device advertises
its power priority as critical, see RFC
3621.
• high: indicates that the device advertises
its power priority as high, see RFC 3621.
• low: indicates that the device advertises its
power priority as low, see RFC 3621.
April 2011 331