Configuring Ipv6 Global Properties Using Edm - Avaya 4524GT Configuration Manual

Variable definitions
Use the data in this table to help you understand the currently loaded and operational software
status display.
Unit 1 Software Image version
Unit 1 Software Image in flash
Unit 1 Diag Image version
Unit 1 Diag Image in flash
Important:
When the currently loaded and operational software status is displayed for a stack, the
unit number is replaced by the word All.

Configuring IPv6 global properties using EDM

Use the following procedure to configure IPv6 global properties.
Procedure steps
1. From the navigation tree, double-click IPv6.
2. In the IPv6 tree, double-click IPv6.
3. On the work area, click the Globals tab.
4. Configure the IPv6 globally.
5. On the toolbar, click Apply to save the changes.
6. Click Refresh to display updated information.
Configuration — System
Variable
Configuring IPv6 global properties using EDM
Value
Indicates the loaded agent software image
for the switch or stack.
Indicates the operational agent software
image for the switch or stack.
Indicates the loaded diagnostic software
image for the switch or stack.
Indicates the operational diagnostic software
image for the switch or stack.
April 2011 249