Configuring Aes Scheduling To Default Using Acli - Avaya 4524GT Configuration Manual

weekday
weekend
<hh:mm>

Configuring AES scheduling to default using ACLI

Use the following procedure to completely disable scheduling for the switch or to disable
specific energy saver schedules.
Prerequisites
• Log on to the Global Configuration mode in ACLI.
• Disable AES globally.
Procedure steps
Configure AES scheduling by using the following command:
default energy-saver schedule
Variable definitions
The following table defines optional parameters that you can enter after the default
energy-saver schedule command.
friday|monday|saturday|
sunday|thursday|tuesday|
wednesday
weekday
weekend
<hh:mm>
Configuration — System
Variable
Variable
Value
Disables AES scheduling for all weekdays.
Disables AES scheduling for Saturday and
Sunday.
Specifies the scheduled AES start time (hour
and minutes).
Value
Configures AES scheduling for a specific day
to default (disabled).
Configures AES scheduling for all weekdays
to default (disabled).
Configures AES scheduling for Saturday and
Sunday to default (disabled).
Specifies the scheduled AES start time (hour
and minutes).
AES configuration using ACLI
April 2011 205