Configuring The Switch Call Server Ip Address Tlv Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
Configuring the switch call server IP address TLV using
EDM
Use this procedure to define the local call server IP addresses that switch ports can advertise
to Avaya IP phones.
You can define IP addresses for a maximum of 8 local call servers.
Important:
The switch does not support the advertisement of IPv6 addresses to Avaya IP phones.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Local Call Servers tab.
6. To select a port, click the CallServerNum.
7. In the port row, double-click the cell in the CallServerAddress column.
8. Type an IP address in the box.
9. On the toolbar, click Apply.
Variable definition
CallServerNum
CallServerAddressType
CallServerAddress
338 Configuration — System
Variable Value
Displays the call server number.
Displays the call server IP address type.
Defines the local call server IP address to
advertise.
April 2011