Displaying Ipv6 Tcp Connections Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
Procedure steps
1. From the navigation tree, double-click IPv6.
2. In the IPv6 tree, double-click TCP/UDP.
3. On the work area, click the TCP Globals tab.
4. Click Refresh to update the information.
Variable definitions
Use the data in the following table to display IPv6 TCP global properties.
RtoAlgorithm
RtoMin
RtoMax
MaxConn

Displaying IPv6 TCP connections using EDM

Use the following procedure to display IPv6 TCP connections.
Procedure steps
1. From the navigation tree, double-click IPv6.
2. In the IPv6 tree, double-click TCP/UDP.
3. On the work area, click the TCP Connections tab.
4. Click Refresh to update the information.
264 Configuration — System
Variable Value
Indicates the algorithm identifier.
Indicates the minimum value in
milliseconds.
Indicates the maximum value in
milliseconds.
Indicates the maximum number of
connections.
April 2011