Configuring A Web And Telnet Password Using Edm - Avaya 3500 Quick Start Configuration

8. In the Re-enter to verify dialog box for the Read-Write Switch Password, retype the
character string.
9. On the toolbar, click Apply.
Field descriptions
Use the descriptions in the following table to configure the console switch password.
Variable
Console Stack Password Type
Read-Only Stack Password
Read-Write Stack Password

Configuring a Web and Telnet password using EDM

Use this procedure to configure a Web and Telnet password for an individual switch.
Procedure
1. From the navigation tree, double-click Security to open the Security tree.
2. In the Security tree, double-click Web/Telnet/Console.
3. In the work area, click the Web/Telnet Password tab.
4. In the Web/Telnet Switch Password Setting, select a value from the Web/Telnet Switch
Password Type list.
5. In the Read-Only Switch Password dialog box, type a character string.
6. In the Re-enter to verify dialog box for the Read-Only Switch Password, retype the
character string.
7. In the Read-Write Switch Password dialog box, type a character string.
8. In the Re-enter to verify dialog box for the Read-Write Switch Password, retype the
character string
9. On the toolbar, click Apply.
September 2016
Setting user access limits using Enterprise Device Manager
Definition
Specify the type of password to use. Values include:
• none—Disables the password
• Local Password—Use the locally-defined
password for serial console access
• RADIUS Authentication—Use RADIUS
authentication for serial console access
• TACACS Authentication—Use TACACS+
authentication, authorization and accounting (AAA)
services authentication for console access
Specify the read-only password for stack or switch
access.
Specify the read-write password for stack or switch
access.
Quick Start Configuration
Comments on this document? infodev@avaya.com
23