AdminStatus
ReachableTime
RetransmitTime
Deleting an IPv6 interface using EDM
Use the following procedure to delete an IPv6 interface.
Procedure steps
1. From the navigation tree, double-click IPv6.
2. In the IPv6 tree, double-click IPv6.
3. On the work area, click the Interfaces tab.
4. To select an interface to delete, click the IfIndex.
5. Click Delete .
Graphing IPv6 Interface Statistics using EDM
Use the following procedure to display and graph IPv6 interface statistics for a switch or
stack.
Procedure steps
1. From the navigation tree, double-click IPv6.
2. In the IPv6 tree, double-click IPv6.
Configuration — System
Variable
Graphing IPv6 Interface Statistics using EDM
Value
Specifies whether the administration status
of the interface is enabled (true) or disabled
(false).
Specifies the time (in milliseconds) that a
neighbor is considered reachable after
receiving a reachability confirmation. Value:
0–36000000 ms
Specifies the RetransmitTime, which is the
time (in milliseconds) between
retransmissions of neighbor solicitation
messages to a neighbor when resolving the
address or when probing the reachability of
a neighbor. Value: 0–36000000 ms
April 2011
253