Configuring The Poe Conservation Level Request Tlv Using Edm - Avaya 4524GT Configuration Manual

fileServer
framingTlv
Configuring the PoE conservation level request TLV using
EDM
Use this procedure to request a specific power conservation level for an Avaya IP phone
connected to a switch port.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Local Port tab.
6. To select a port, click the PortNum.
7. In the port row, double-click the cell in the PoeConsLevelRequest column.
8. Type a value in the box.
9. On the toolbar, click Apply.
Variable definition
PoeConsLevelRequest
Configuration — System
Variable
When displayed, indicates that file server IPv4 address
advertisement to an Avaya IP phone is enabled on the
switch port.
When displayed, indicates that frame tagging is
enabled on the port, for exchanging Layer 2 priority
tagging information between the switch and an Avaya
IP phone.
Variable

Configuring the PoE conservation level request TLV using EDM

Value
Specifies the power conservation level to request
for a vendor specific PD. Values range from 0 to
255. With the default value of 0, the switch does not
request a power conservation level for an Avaya IP
phone connected to the port.
Value
April 2011 335