Viewing The Avaya Tlv Transmit Flag Status Using Edm - Avaya 4524GT Configuration Manual

System configuration using Enterprise Device Manager
callServer
fileServer
framingTlv

Viewing the Avaya TLV transmit flag status using EDM

Use this procedure to display the status of transmit flags for switch ports on which Avaya IP
phone support TLVs are configured.
Procedure steps
1. From the navigation tree, double-click Edit.
2. In the Edit tree, click Diagnostics.
3. In the Diagnostics tree, click 802.1AB.
4. In the 802.1AB tree, click Avaya.
5. In the work area, click the Port Config tab.
Variable definition
poeConservationLevel
callServer
334 Configuration — System
Variable
Variable
When displayed, indicates that the TLV for requesting
a specific power conservation level for an Avaya IP
phone is enabled on the switch port.
When displayed, indicates that call server IPv4
address advertisement to an Avaya IP phone is
enabled on the switch port.
Value
Important:
Only Ethernet ports on switches that support
PoE can request a specific power conservation
level for an Avaya IP phone.
Enables or disables the TLV for advertising call
server IPv4 addresses to an Avaya IP phone
connected to the switch port.
Enables or disables the TLV for advertising file
server IPv4 addresses to an Avaya IP phone
connected to the switch port.
Enables or disables the frame tagging TLV for
exchanging Layer 2 priority tagging information
between the switch and an Avaya IP phone.
Value
Important:
Only Ethernet ports on switches that support PoE
can request a specific power conservation level for
an Avaya IP phone.
April 2011